change version to 0.8.4-1 (unstable)

[ SVN-Git Migration ]
git-dpm config
Update Vcs fields for git migration
[ Ondřej Nový ]
[ Sergio Durigan Junior ]
Import texttable_0.8.4.orig.tar.gz
Updating Standards-Version to 3.9.8
Adding myself to Uploaders. (Closes: #826156)

LICENSE

@@ -0,0 +1,165 @@
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

PKG-INFO

@@ -1,12 +1,12 @@
-Metadata-Version: 1.1
+Metadata-Version: 1.0
 Name: texttable
-Version: 0.8.1
+Version: 0.8.4
 Summary: module for creating simple ASCII tables
-Home-page: http://foutaise.org/code/
+Home-page: https://github.com/foutaise/texttable/
 Author: Gerome Fournier
 Author-email: jef(at)foutaise.org
 License: LGPL
-Download-URL: http://foutaise.org/code/texttable/texttable-0.8.1.tar.gz
+Download-URL: https://github.com/foutaise/texttable/archive/v0.8.4.tar.gz
 Description: texttable is a module to generate a formatted text table, using ASCII
         characters.
 Platform: any

README.md

@@ -0,0 +1,223 @@
+# texttable
+
+Python module for creating simple ASCII tables
+
+## Availability
+
+This module is available on [PypI](https://pypi.python.org/pypi/texttable/0.8.4), and has been packaged for several Linux/Unix platforms
+([Debian](https://packages.debian.org/search?&searchon=names&keywords=python-texttable+),
+[FreeBSD](https://www.freebsd.org/cgi/ports.cgi?query=texttable&stype=all), Fedora, Suse...).
+
+## Documentation
+
+```
+NAME
+    texttable - module for creating simple ASCII tables
+
+FILE
+    /usr/lib/python2.3/site-packages/texttable.py
+
+DESCRIPTION
+    
+    Example:
+    
+        table = Texttable()
+        table.set_cols_align(["l", "r", "c"])
+        table.set_cols_valign(["t", "m", "b"])
+        table.add_rows([["Name", "Age", "Nickname"], 
+                        ["Mr\nXavier\nHuon", 32, "Xav'"],
+                        ["Mr\nBaptiste\nClement", 1, "Baby"]])
+        print table.draw() + "\n"
+    
+        table = Texttable()
+        table.set_deco(Texttable.HEADER)
+        table.set_cols_dtype(['t',  # text 
+                              'f',  # float (decimal)
+                              'e',  # float (exponent)
+                              'i',  # integer
+                              'a']) # automatic
+        table.set_cols_align(["l", "r", "r", "r", "l"])
+        table.add_rows([["text",    "float", "exp", "int", "auto"],
+                        ["abcd",    "67",    654,   89,    128.001],
+                        ["efghijk", 67.5434, .654,  89.6,  12800000000000000000000.00023],
+                        ["lmn",     5e-78,   5e-78, 89.4,  .000000000000128],
+                        ["opqrstu", .023,    5e+78, 92.,   12800000000000000000000]])
+        print table.draw()
+    
+    Result:
+    
+        +----------+-----+----------+
+        |   Name   | Age | Nickname |
+        +==========+=====+==========+
+        | Mr       |     |          |
+        | Xavier   |  32 |          |
+        | Huon     |     |   Xav'   |
+        +----------+-----+----------+
+        | Mr       |     |          |
+        | Baptiste |   1 |          |
+        | Clement  |     |   Baby   |
+        +----------+-----+----------+
+    
+        text   float       exp      int     auto
+        ===========================================
+        abcd   67.000   6.540e+02   89    128.001
+        efgh   67.543   6.540e-01   90    1.280e+22
+        ijkl   0.000    5.000e-78   89    0.000
+        mnop   0.023    5.000e+78   92    1.280e+22
+
+CLASSES
+    class Texttable
+     |  Methods defined here:
+     |  
+     |  __init__(self, max_width=80)
+     |      Constructor
+     |      
+     |      - max_width is an integer, specifying the maximum width of the table
+     |      - if set to 0, size is unlimited, therefore cells won't be wrapped
+     |  
+     |  add_row(self, array)
+     |      Add a row in the rows stack
+     |      
+     |      - cells can contain newlines and tabs
+     |  
+     |  add_rows(self, rows, header=True)
+     |      Add several rows in the rows stack
+     |      
+     |      - The 'rows' argument can be either an iterator returning arrays,
+     |        or a by-dimensional array
+     |      - 'header' specifies if the first row should be used as the header
+     |        of the table
+     |  
+     |  draw(self)
+     |      Draw the table
+     |      
+     |      - the table is returned as a whole string
+     |  
+     |  header(self, array)
+     |      Specify the header of the table
+     |  
+     |  reset(self)
+     |      Reset the instance
+     |      
+     |      - reset rows and header
+     |  
+     |  set_chars(self, array)
+     |      Set the characters used to draw lines between rows and columns
+     |      
+     |      - the array should contain 4 fields:
+     |      
+     |          [horizontal, vertical, corner, header]
+     |      
+     |      - default is set to:
+     |      
+     |          ['-', '|', '+', '=']
+     |  
+     |  set_cols_align(self, array)
+     |      Set the desired columns alignment
+     |      
+     |      - the elements of the array should be either "l", "c" or "r":
+     |      
+     |          * "l": column flushed left
+     |          * "c": column centered
+     |          * "r": column flushed right
+     |  
+     |  set_cols_dtype(self, array)
+     |      Set the desired columns datatype for the cols.
+     |      
+     |      - the elements of the array should be either "a", "t", "f", "e" or "i":
+     |      
+     |          * "a": automatic (try to use the most appropriate datatype)
+     |          * "t": treat as text
+     |          * "f": treat as float in decimal format
+     |          * "e": treat as float in exponential format
+     |          * "i": treat as int
+     |      
+     |      - by default, automatic datatyping is used for each column
+     |  
+     |  set_cols_valign(self, array)
+     |      Set the desired columns vertical alignment
+     |      
+     |      - the elements of the array should be either "t", "m" or "b":
+     |      
+     |          * "t": column aligned on the top of the cell
+     |          * "m": column aligned on the middle of the cell
+     |          * "b": column aligned on the bottom of the cell
+     |  
+     |  set_cols_width(self, array)
+     |      Set the desired columns width
+     |      
+     |      - the elements of the array should be integers, specifying the
+     |        width of each column. For example:
+     |      
+     |              [10, 20, 5]
+     |  
+     |  set_deco(self, deco)
+     |      Set the table decoration
+     |      
+     |      - 'deco' can be a combinaison of:
+     |      
+     |          Texttable.BORDER: Border around the table
+     |          Texttable.HEADER: Horizontal line below the header
+     |          Texttable.HLINES: Horizontal lines between rows
+     |          Texttable.VLINES: Vertical lines between columns
+     |      
+     |         All of them are enabled by default
+     |      
+     |      - example:
+     |      
+     |          Texttable.BORDER | Texttable.HEADER
+     |  
+     |  set_precision(self, width)
+     |      Set the desired precision for float/exponential formats
+     |      
+     |      - width must be an integer >= 0
+     |      
+     |      - default value is set to 3
+     |  
+     |  ----------------------------------------------------------------------
+     |  Data and other attributes defined here:
+     |  
+     |  BORDER = 1
+     |  
+     |  HEADER = 2
+     |  
+     |  HLINES = 4
+     |  
+     |  VLINES = 8
+
+DATA
+    __all__ = ['Texttable', 'ArraySizeError']
+    __author__ = 'Gerome Fournier <jef(at)foutaise.org>'
+    __credits__ = 'Jeff Kowalczyk:\n    - textwrap improved import\n ...:\...
+    __license__ = 'LGPL'
+    __version__ = '0.8.4'
+
+VERSION
+    0.8.4
+
+AUTHOR
+    Gerome Fournier <jef(at)foutaise.org>
+
+CREDITS
+    Jeff Kowalczyk:
+        - textwrap improved import
+        - comment concerning header output
+    
+    Anonymous:
+        - add_rows method, for adding rows in one go
+    
+    Sergey Simonenko:
+        - redefined len() function to deal with non-ASCII characters
+    
+    Roger Lew:
+        - columns datatype specifications
+    
+    Brian Peterson:
+        - better handling of unicode errors
+    
+    Frank Sachsenheim:
+        - add Python 2/3-compatibility
+    
+    Maximilian Hils:
+        - fix minor bug for Python 3 compatibility
+```

debian/.git-dpm

@@ -0,0 +1,11 @@
+# see git-dpm(1) from git-dpm package
+5073fb8f19ce80528dc5057a6c0c51ebb26e1298
+5073fb8f19ce80528dc5057a6c0c51ebb26e1298
+5073fb8f19ce80528dc5057a6c0c51ebb26e1298
+5073fb8f19ce80528dc5057a6c0c51ebb26e1298
+texttable_0.8.4.orig.tar.gz
+cef25487684c232acb3377d3e5daa41842c73adc
+9677
+debianTag="debian/%e%v"
+patchedTag="patched/%e%v"
+upstreamTag="upstream/%e%u"

debian/changelog

@@ -0,0 +1,21 @@
+texttable (0.8.4-1) unstable; urgency=medium
+
+  [ SVN-Git Migration ]
+  * git-dpm config
+  * Update Vcs fields for git migration
+
+  [ Ondřej Nový ]
+  * Fixed VCS URL (https)
+
+  [ Sergio Durigan Junior ]
+  * Import texttable_0.8.4.orig.tar.gz
+  * Updating Standards-Version to 3.9.8
+  * Adding myself to Uploaders. (Closes: #826156)
+
+ -- Sergio Durigan Junior <sergiodj@sergiodj.net>  Thu, 16 Jun 2016 20:20:29 -0400
+
+texttable (0.8.1-1) unstable; urgency=low
+
+    * Initial release. (Closes: #719238)
+
+ -- Léo Cavaillé <leo@cavaille.net>  Thu, 15 Aug 2013 16:06:59 +0200

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,19 @@
+Source: texttable
+Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
+Uploaders: Sergio Durigan Junior <sergiodj@sergiodj.net>, Léo Cavaillé <leo@cavaille.net>
+Section: python
+Priority: optional
+Build-Depends: python-all (>= 2.6.6-3), debhelper (>= 9)
+Standards-Version: 3.9.8
+Homepage: https://github.com/bufordtaylor/python-texttable
+Vcs-Git: https://anonscm.debian.org/git/python-modules/packages/texttable.git
+Vcs-Browser: https://anonscm.debian.org/cgit/python-modules/packages/texttable.git
+
+Package: python-texttable
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}
+Description: Module for creating simple ASCII tables
+ texttable is a module to generate a formatted text table, using ASCII
+ characters.
+ It provides nice human-readable output for arrays when designing
+ a CLI or just output data.

debian/copyright

@@ -0,0 +1,29 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: texttable
+Source: https://pypi.python.org/packages/source/t/texttable/texttable-0.8.1.tar.gz
+
+Files: *
+Copyright: 2003 - 2011 Buford Taylor
+License: LGPL-2.1+
+
+Files: debian/* 
+Copyright: 2013 Léo Cavaillé <leo@cavaille.net> 
+License: LGPL-2.1+
+
+License: LGPL-2.1+
+ texttable is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ .
+ texttable is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+ .
+ You should have received a copy of the GNU Lesser General Public
+ License along with texttable; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ .
+ On Debian systems, a copy of the license can be found at
+ `/usr/share/common-licenses/LGPL-2.1`.

debian/rules

@@ -0,0 +1,4 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@ --with python2

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/watch

@@ -0,0 +1,2 @@
+version=3
+https://pypi.python.org/packages/source/t/texttable/texttable-(.*)\.tar\.gz

setup.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python
 #
 # texttable - module for creating simple ASCII tables
-# Copyright (C) 2003-2011 Gerome Fournier <jef(at)foutaise.org>
+# Copyright (C) 2003-2015 Gerome Fournier <jef(at)foutaise.org>
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -33,11 +33,11 @@ if sys.version < '2.2.3':
 
 setup(
     name = "texttable",
-    version = "0.8.1",
+    version = "0.8.4",
     author = "Gerome Fournier", 
     author_email = "jef(at)foutaise.org",
-    url = "http://foutaise.org/code/",
-    download_url = "http://foutaise.org/code/texttable/texttable-0.8.1.tar.gz",
+    url = "https://github.com/foutaise/texttable/",
+    download_url = "https://github.com/foutaise/texttable/archive/v0.8.4.tar.gz",
     license = "LGPL",
     py_modules = ["texttable"],
     description = DESCRIPTION,

texttable.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python
 #
 # texttable - module for creating simple ASCII tables
-# Copyright (C) 2003-2011 Gerome Fournier <jef(at)foutaise.org>
+# Copyright (C) 2003-2015 Gerome Fournier <jef(at)foutaise.org>
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -15,7 +15,7 @@
 #
 # You should have received a copy of the GNU Lesser General Public
 # License along with this library; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
 
 """module for creating simple ASCII tables
 
@@ -71,7 +71,7 @@ __all__ = ["Texttable", "ArraySizeError"]
 
 __author__ = 'Gerome Fournier <jef(at)foutaise.org>'
 __license__ = 'LGPL'
-__version__ = '0.8.1'
+__version__ = '0.8.4'
 __credits__ = """\
 Jeff Kowalczyk:
     - textwrap improved import
@@ -88,6 +88,12 @@ Roger Lew:
 
 Brian Peterson:
     - better handling of unicode errors
+
+Frank Sachsenheim:
+    - add Python 2/3-compatibility
+
+Maximilian Hils:
+    - fix minor bug for Python 3 compatibility
 """
 
 import sys
@@ -104,10 +110,8 @@ except ImportError:
     sys.stderr.write("Can't import textwrap module!\n")
     raise
 
-try:
-    True, False
-except NameError:
-    (True, False) = (1, 0)
+if sys.version >= '2.7':
+    from functools import reduce
 
 def len(iterable):
     """Redefining len here so it will be able to work with non-ASCII characters
@@ -116,10 +120,14 @@ def len(iterable):
         return iterable.__len__()
     
     try:
+        if sys.version >= '3.0':
+            return len(str)
+        else:
             return len(unicode(iterable, 'utf'))
     except:
         return iterable.__len__()
 
+
 class ArraySizeError(Exception):
     """Exception raised when specified rows don't fit the required size
     """
@@ -131,6 +139,7 @@ class ArraySizeError(Exception):
     def __str__(self):
         return self.msg
 
+
 class Texttable:
 
     BORDER = 1
@@ -179,7 +188,7 @@ class Texttable:
         """
 
         if len(array) != 4:
-            raise ArraySizeError, "array should contain 4 characters"
+            raise ArraySizeError("array should contain 4 characters")
         array = [ x[:1] for x in [ str(s) for s in array ] ]
         (self._char_horiz, self._char_vert,
             self._char_corner, self._char_header) = array
@@ -257,7 +266,7 @@ class Texttable:
 
         self._check_row_size(array)
         try:
-            array = map(int, array)
+            array = list(map(int, array))
             if reduce(min, array) <= 0:
                 raise ValueError
         except ValueError:
@@ -282,7 +291,7 @@ class Texttable:
         """
 
         self._check_row_size(array)
-        self._header = map(str, array)
+        self._header = list(map(str, array))
 
     def add_row(self, array):
         """Add a row in the rows stack
@@ -388,8 +397,8 @@ class Texttable:
         if not self._row_size:
             self._row_size = len(array)
         elif self._row_size != len(array):
-            raise ArraySizeError, "array should contain %d elements" \
-                % self._row_size
+            raise ArraySizeError("array should contain %d elements" \
+                % self._row_size)
 
     def _has_vlines(self):
         """Return a boolean, if vlines are required or not
@@ -440,7 +449,7 @@ class Texttable:
         s = "%s%s%s" % (horiz, [horiz, self._char_corner][self._has_vlines()],
             horiz)
         # build the line
-        l = string.join([horiz * n for n in self._width], s)
+        l = s.join([horiz * n for n in self._width])
         # add border if needed
         if self._has_border():
             l = "%s%s%s%s%s\n" % (self._char_corner, horiz, l, horiz,
@@ -461,10 +470,10 @@ class Texttable:
         for line in cell_lines:
             length = 0
             parts = line.split('\t')
-            for part, i in zip(parts, range(1, len(parts) + 1)):
+            for part, i in zip(parts, list(range(1, len(parts) + 1))):
                 length = length + len(part)
                 if i < len(parts):
-                    length = (length/8 + 1) * 8
+                    length = (length//8 + 1) * 8
             maxi = max(maxi, length)
         return maxi
 
@@ -482,7 +491,7 @@ class Texttable:
         if self._header:
             maxi = [ self._len_cell(x) for x in self._header ]
         for row in self._rows:
-            for cell,i in zip(row, range(len(row))):
+            for cell,i in zip(row, list(range(len(row)))):
                 try:
                     maxi[i] = max(maxi[i], self._len_cell(cell))
                 except (TypeError, IndexError):
@@ -490,7 +499,7 @@ class Texttable:
         items = len(maxi)
         length = reduce(lambda x, y: x+y, maxi)
         if self._max_width and length + items * 3 + 1 > self._max_width:
-            maxi = [(self._max_width - items * 3 -1) / items \
+            maxi = [(self._max_width - items * 3 -1) // items \
                     for n in range(items)]
         self._width = maxi
 
@@ -525,8 +534,8 @@ class Texttable:
                 if align == "r":
                     out += "%s " % (fill * space + cell_line)
                 elif align == "c":
-                    out += "%s " % (fill/2 * space + cell_line \
-                            + (fill/2 + fill%2) * space)
+                    out += "%s " % (int(fill/2) * space + cell_line \
+                            + int(fill/2 + fill%2) * space)
                 else:
                     out += "%s " % (cell_line + fill * space)
                 if length < len(line):
@@ -546,26 +555,33 @@ class Texttable:
             array = []
             for c in cell.split('\n'):
                 try:
+                    if sys.version >= '3.0':
+                        c = str(c)
+                    else:
                         c = unicode(c, 'utf')
-                except UnicodeDecodeError, strerror:
+                except UnicodeDecodeError as strerror:
                     sys.stderr.write("UnicodeDecodeError exception for string '%s': %s\n" % (c, strerror))
+                    if sys.version >= '3.0':
+                        c = str(c, 'utf', 'replace')
+                    else:
                         c = unicode(c, 'utf', 'replace')
                 array.extend(textwrap.wrap(c, width))
             line_wrapped.append(array)
-        max_cell_lines = reduce(max, map(len, line_wrapped))
+        max_cell_lines = reduce(max, list(map(len, line_wrapped)))
         for cell, valign in zip(line_wrapped, self._valign):
             if isheader:
                 valign = "t"
             if valign == "m":
                 missing = max_cell_lines - len(cell)
-                cell[:0] = [""] * (missing / 2)
-                cell.extend([""] * (missing / 2 + missing % 2))
+                cell[:0] = [""] * int(missing / 2)
+                cell.extend([""] * int(missing / 2 + missing % 2))
             elif valign == "b":
                 cell[:0] = [""] * (max_cell_lines - len(cell))
             else:
                 cell.extend([""] * (max_cell_lines - len(cell)))
         return line_wrapped
 
+
 if __name__ == '__main__':
     table = Texttable()
     table.set_cols_align(["l", "r", "c"])
@@ -573,7 +589,7 @@ if __name__ == '__main__':
     table.add_rows([["Name", "Age", "Nickname"],
                     ["Mr\nXavier\nHuon", 32, "Xav'"],
                     ["Mr\nBaptiste\nClement", 1, "Baby"]])
-    print table.draw() + "\n"
+    print(table.draw() + "\n")
 
     table = Texttable()
     table.set_deco(Texttable.HEADER)
@@ -588,4 +604,4 @@ if __name__ == '__main__':
                     ["efghijk", 67.5434, .654,  89.6,  12800000000000000000000.00023],
                     ["lmn",     5e-78,   5e-78, 89.4,  .000000000000128],
                     ["opqrstu", .023,    5e+78, 92.,   12800000000000000000000]])
-    print table.draw()
+    print(table.draw())